On
the Fast Track with…
State-Of-The-Art-Mailer
Effectively Using StateOfTheArtMailer to Have
Your Ad Emailed
For most effective use of each
of the CHIP programs, we recommend using three separate browser
windows: We recommend opening this Tutorial in one
browser window, while your Adtracker is opened in a second
browser window. Eventually, then, your State-Of-The-Art-Mailer website
will be opened in a third
browser window.
PART A:
Entering State-Of-The-Art-Mailer for the FIRST time, to send out your
first ad.
Step
1: (of five)
Copy-and-paste the URL for
State-Of-The-Art-Mailer from your AdTracker into your browser. If
you've followed our instructions, that URL will look like this:
https://state-of-the-art-mailer.com
Go to the State-Of-The-Art-Mailer website.
Click the "Login"
link in the upper right coner.
On the "Login"
page, enter your username (Primary email address) and password, and click the
rectangular gray "Submit"
button to go to the Members Area.
Step 2: (Important
Side Note)
You will now be introduced to what
are called "LogIn Ads" or
"Sponsor
Ads"
These are full-page ads that
are ads purchased by other members of .State-Of-The-Art-Mailer (There will be TWO
of these ads, displayed one at a time.)
You must view BOTH of
these ads for at least fifteen seconds each before you can proceed
to the Members Area.
When fifteen seconds have elapsed, a
hotlink reading, "Continue to the
Members Area" will appear in a long blue-gray bar
at the bottom of the page.
Click this hotlink to proceed.
When you click the hotlink, the SECOND
Login Ad will be displayed for another fifteen seconds. When
fifteen seconds have elapsed, another hotlink reading, "Continue
to the Members Area" will appear in a long
blue-gray bar at the bottom of the page.
Click this hotlink to proceed.
You will be taken to the "At
Least 'X' Full Page Login Ad Is Available!" page
where YOU can purchase login ads yourself. However, you
will want to ignore this right now, and continue to the area to
send out your email ad.
Scroll to the bottom of this page
and click the "No
thank you. I will pass for now. Continue to the Members
Area." hotlink in
the long blue-gray bar.
Eventually, ..... you will be on the
members area page of the State-Of-The-Art-Mailer
site, the
"Scroll Down And Select
An Active Button To Email Now!"
page.
Step
3:
Scroll down to the page to
the first long, rectangular blue button and click the "Mail
30,00 Members" hotlink.
You
will be on
the "Enter Your Ad URL Here"
page
On
the "Enter Your Ad URL Here" page, copy and paste the adtracker link for
State-Of-The-Art-Mailer into the appropriate block.. If
you've followed our instructions, that URL will look similar to this:
https://www.trker.com/go/123456
(NOTE: Make SURE to copy and paste the ENTIRE
URL, INCLUDING the "https" portion;
otherwise the link will NOT work!)
Click the rectangular gray "Submit
URL" button.
Your URL will be subjected to a
"frame breaker test." When this test is completed
(takes just a few seconds) click the rectangular gray "Proceed"
button near the top of the page.
(Note: You have to pass
the "frame breaker test" ONLY when you change your ad
URL.)
You will immediately be taken to
the "Editor Legend" page, where you will enter the
information about your ad.
Step 4:
On the "Editor
Legend"
page scroll down
to the
blocks into which you will enter the following information for your ad:
(1)
In the first
block ("Subject"),
copy and paste the Subject Line of your ad.
(2)
In the second block ("Promoted
URL"),
you will note that, since your adtracker link has already passed
the "frame breaker test" it is already inserted.
(3) In the
third block (unlabeled),
copy and paste your actual Sales Message
(4) Click the rectangular
gray "Send Email Now" button
Step 5:
Once your
site is confirmed, you should observe the text, "Mail
Complete! Your e-mail has been placed in queue and will be sent shortly!"
Summary
Part A- After You've Sent Your First Ad
That's it! You're done!
Your sales message has been placed in the queue and shortly, your
State-Of-The-Art-Mailer site will AUTOMATICALLY send it out to the database
of targeted prospects. The only time you need to return to
the site is when you wish to send out your ad again.
For now..... (1)
close the State-Of-The-Art-Mailer
site and (2)
close this browser window to return to the Training Manual website to continue
on to the next Fast-Track Tutorial.
PART B:
Entering State-Of-The-Art-Mailer again (on a different day, of course), to send out your
ad out succeeding times.
Step
1:
Copy-and-paste the URL for
State-Of-The-Art-Mailer from your AdTracker into your browser. If
you've followed our instructions, that URL will look similar this:
https://state-of-the-art-mailer.com
Go to the State-Of-The-Art-Mailer website.
Click the "Login"
link in the upper right corner.
On the "Login"
page, enter your username (Primary email address) and password, and click the
rectangular gray "Submit"
button to go to the Members Area.
Step 2: (Important
Side Bar)
You will now be introduced to what
are called "LogIn Ads" or
"Sponsor
Ads"
These are full-page ads that
are ads purchased by other members of .State-Of-The-Art-Mailer (There will be TWO
of these ads, displayed one at a time.)
You must view BOTH of
these ads for at least fifteen seconds each before you can proceed
to the Members Area.
When fifteen seconds have elapsed, a
hotlink reading, "Continue to the
Members Area" will appear in a long blue-gray bar
at the bottom of the page.
Click this hotlink to proceed.
When you click the hotlink, the SECOND
Login Ad will be displayed for another fifteen seconds. When
fifteen seconds have elapsed, another hotlink reading, "Continue
to the Members Area" will appear in a long
blue-gray bar at the bottom of the page.
Click this hotlink to proceed.
You will be taken to the "At
Least 'X' Full Page Login Ad Is Available!" page
where YOU can purchase login ads yourself. However, you
will want to ignore this right now, and continue to the area to
send out your email ad.
Scroll to the bottom of this page
and click the "No
thank you. I will pass for now. Continue to the Members
Area." hotlink in
the long blue-gray bar.
Eventually, ..... you will be on the
members area page of the State-Of-The-Art-Mailer
site, the
"Scroll Down And Select
An Active Button To Email Now!"
page.
Step
3:
Scroll down to the page to
the first long, rectangular blue button and click the "Mail
30,00 Members" hotlink.
On
the "Enter Your Ad URL Here"
page, note that.....
.....you
no longer have to copy and paste the adtracker link for
State-Of-The-Art-Mailer into the "Enter Your Ad URL Here"
block!
(UNLESS you are changing your ad URL.)
Instead.....
.....click the rectangular gray "Run
Previous Ad" button
Step 4:
You will be on
the "Your Last 5 Sent Emails"
page
which shows a small table displaying
data about your ten most recent ads. Your ten most recent ads
are automatically saved to this page each time
you mail.
In the fifth column
(the "Re-Use Mail" column), click the rectangular
gray "Reuse Ad" button.
Step 5:
Upon clicking that "Reuse
Ad" button you will immediately be taken back to the "Editor
Legend"
page, where - LO AND BEHOLD! - your Message
Subject, Message Body, and Site URL are already filled in!
Since you are a
top-level ViraList member, your ad will be sent to the entire
StateOfTheArtMailer membership. At this point all that remains
for you to do is to click the rectangular gray "Send Mail
Now" button!
You should observe the text,
"Mail
Complete! Your e-mail has been placed in queue and will be sent shortly!"
Summary
Part B- After You've Sent Succeeding Ads
That's it! You're done! Since your ad templates are
automatically saved, this has cut your mailing time by 75%. From
now on, each mailing you do can be done in less than a minute!
Your sales message has been placed in the queue and shortly, your
State-Of-The-Art-Mailer site will AUTOMATICALLY send it out to the database
of targeted prospects. The only time you need to return to
the site is when you wish to send out your ad again. For
now, close the State-Of-The-Art-Mailer site and continue on to the
next
Fast-Track Tutorial.
IMPORTANT!
How often should you change your ad? We recommend changing
(and saving) your ad NO MORE THAN ONCE A MONTH! Keeping the same ad
in "Templates" for a month at a time cuts down your time IMMEASURABLY
- that should be obvious.
If you want to use different ads, remember that, as an Alpha Dog,
you have at your disposal, over a dozen OTHER programs into which
you CAN use different ads, saving THEIR templates.
(Note:
Each of the companies in the CHIP program are independent entities.
As such, the owners of these companies may change the directions on
how to use their program at any time. If you find that the
directions on the website deviate from those in this Fast Track Guide,
please inform the Big Dogs Home Office at Stan@BigDogSecrets.com
so that we may update the Guide.)
(To return to
the Training Manual website, just close this browser window.)
|